Primera Technology Fujitsu Tape Drive RX300 S2 User Manual
Page 119
119
PRIMERGY RX300 S2 User’s Guide
4
Manu
al O
S
In
st
allation
7
Install the chipset driver.
1. Insert the ServerStart CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the ServerStart CD-ROM.
[CD-ROM drive]:\DRIVERS\ChipSet\Intel\infinst_autol.exe
The installation wizard starts up.
3. Click [Next]. Follow instructions in the window to perform installation.
4. When the "InstallShield(R) wizard has completed." message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.124).
9
Install the SAF-TE driver.
1. Insert the ServerStart CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Click [Start]
→ [Administrative Tools] → [Computer Management].
3. Click [Device Manager].
4. Double-click [TOSHIBA SAF-TE SCSI Processor Device] under [System devices].
The properties window appears.
5. Click the [Driver] tab and click [Update Driver].
The [Device Driver Upgrade Wizard] window appears.
6. Click [Next].
7. Select [Find an optimum driver (Recommended)] and click [Next].
8. Select only [CD-ROM drive] in [Search location options] and click [Next].
9. Select [Install another driver] and click [Next].
10. Select [FSC SCSI Termination Module] and click [Next].
Installation starts. When it is completed, a completion message appears.
11. Click [Finish].
12. Click [Close] to close the properties window.
10
Install the RAID Management Tool.
For the installation procedure, refer to "Installing RAID Management Tool (Global Array
Manager)" in "PRIMERGY RX300 S2 Onboard SCSI RAID User's Guide".
The installation of Windows Server 2003 has completed.