Primera Technology Fujitsu Tape Drive RX300 S2 User Manual
Page 192
192
Chapter 7 Installing Internal Options
●
When Installed as Standard
-: Not installable.
●
With Basic Card Slot Conversion Kit
*1: The PG-1862 cannot be installed together with other LAN cards.
■ Notes on Installing Expansion Cards
●
Driver
For expansion card drivers, refer to "2.3.5 Expansion Cards Supported by ServerStart" ( pg.50).
●
Notes on Each Card
For notes of specific expansion card, refer to the manuals supplied with the card and the notes provided
with the server. Also, check the following for respective expansion cards.
●
SCSI Card/RAID Card
• Connection of a SCSI device
Connect a SCSI device supported by this server to the SCSI or RAID card. Operations of
unsupported SCSI devices are not guaranteed.
table: Expansion card installation positions and order (Standard)
Installable expansion card (Model name)
PCI slot
Installatio
n order
1
2
3
4
5
Parallel Port (PG-PP03)
-
-
-
-
1
1
Remote Service Board (PG-RSB103L)
-
-
1
-
-
2
SCSI Ctrl U160 lp (PG-130L)
1
2
3
4
5
3
Fibre Channel Controller (PG-FC106)
3
4
5
1
2
4
Eth. Ctrl 1000-BASE-T Cu lp (PG-1892L)
3
4
5
1
2
5
Eth. Ctrl 1000-BASE-SX Fibre LC lp (PG-1882L)
3
4
5
1
2
6
table: Expansion card installation positions and order (With Basic Card Slot Conversion Kit)
Installable expansion card (Model name)
PCI slot
Installati
on order
6
7
8
RAID Ctrl 2-Channel 128MB w/ BBU (PG-142E3)
1
2
3
1
Remote Service Board (PG-RSB103)
1
2
3
2
SCSI Ctrl U160 (PG-128)
1
2
3
3
Fibre Channel Controller (PG-FC106)
1
2
3
4
Eth. Ctrl 1000-BASE-T Cu (PG-1892)
1
2
3
5
Eth. Ctrl 1000-BASE-SX Fibre LC (PG-1882)
1
2
3
6
Eth. Ctrl 1000-BASE-T Cu (PG-1852)
1
2
3
7
Eth. Ctrl 2 x 1000-BASE-T Cu (PG-1862) *1
1
2
3
8