Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 232)

232
Chapter 8 Hardware Configuration/Utilities
Parallel Mode • Printer
• Bidirection (at the time
of purchase)
• EPP
• ECP
Sets the data transfer mode of the parallel port.
Diskette Controller • Enabled (at the time of
purchase)
• Disabled
Sets whether to enable or disable the floppy disk
controller.
Floppy Type Local (Fixed parameter) Sets the type of floppy disk to be used.
When using the server's internal floppy disk drive,
select [Local].
Local Bus IDE adapter Both (Fixed parameter) Sets whether or not to use the IDE adapter.
Mouse Controller • Disabled
• Enabled
• Auto Detect (at the time
of purchase)
Sets whether or not to use the mouse connected to
the mouse connector.
SCSI Controller ChannelA&B (Fixed
parameter) Sets whether to enable or disable the onboard SCSI
controller.
SCSI Option ROM Scan • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to initialize the extended ROM.
RAID Enabled (Fixed parameter) Sets whether to enable or disable RAID.
LAN Controller ChannelA&B (Fixed
parameter) Sets whether to enable or disable the onboard LAN
controller (channel A, or channels A and B).
LAN Remote Boot Ch.A • Disabled (at the time of
purchase)
• PXE
Sets whether to enable loading of the OS from the
server. This function is used particularly when
neither a floppy disk drive or a hard disk drive is
installed or they are turned off.
LAN Remote Boot Ch.B
table: Items on the Peripheral Configuration Submenu
Item Setting Description