Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 245)

245
PRIMERGY RX300 S2 User’s Guide
8
Hardwa
re C
onfigu
rat
ion/Utilitie
s
8.2.14 Memory Status Submenu
Appears when [Memory Status] is selected from the [Server] menu.
This submenu sets whether or not to allow the use of the installed memory.
table: Items on the Memory Status Submenu
Item Setting Description
Memory Module 0A Enabled (Fixed parameter) Sets whether or not to allow the use of memory in
Memory Slots 0A to 3B.
If [Disabled] or [Failed] is displayed, change the
setting to [Enabled] after replacing the memory.
Memory Module 0B
Memory Module 1A
Memory Module 1B
Memory Module 2A
Memory Module 2B
Memory Module 3A
Memory Module 3B
Item Specific Help
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9 Setup Defaults
PhoenixBIOS Setup Utility
Server
Memory Module 0A [Enabled]
Memory Module 0B [Enabled]
Memory Module 1A [Enabled]
Memory Module 1B [Enabled]
Memory Module 2A [Enabled]
Memory Module 2B [Enabled]
Memory Status
F7 Previous Values
Memory Module 3A [Enabled]
Memory Module 3B [Enabled]