Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 200)

200
Chapter 7 Installing Internal Options
5
Attach an expansion card.
Securely attach the expansion card to the connector of the riser card, and fix it with the screws
removed in step 4.
Insert the expansion card to the connector of the riser card. Then remove it once and attach it
to the connector of the riser card again.
6
Attach the riser card to the server.
Securely attach the riser card to the connector of the server, and fasten hand screws to fix it.
After attaching the riser card to the server, remove it once and attach it to the server again.
7
Attach the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
To remove the expansion card, simply reverse the installation procedure.
Expansion Card
Screw
Hand screws
Riser card