Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 38)

38
Chapter1 Overview
If the CD-ROM is placed improperly when the tray is pushed into the unit, the CD-ROM or the
drive may be damaged.
Be careful not to touch the lens of the CD-ROM drive.
4
Move the tray back.
Push the tray gently until it clicks into position.
Push the center of the CD-ROM unit bezel gently until the tray clicks into position.
■ Ejecting the CD-ROM
To eject the CD-ROM, press the CD-ROM eject button in the same way as steps 1 to 2 in "
■
Inserting
the CD-ROM" ( pg.37).
CD-ROM unit bezel