Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 229)

229
PRIMERGY RX300 S2 User’s Guide
8
Hardwa
re C
onfigu
rat
ion/Utilitie
s
Boot Menu Enabled (Fixed parameter) Sets whether to enable or disable the boot menu.
MultiBoot for HDs • Disabled (at the time of
purchase)
• Enabled
Sets whether or not it is possible to specify the
order of hard disks to boot the operating system
(OS) when several hard disk units are installed.
Note:
To perform a network boot (PXE), set to
[Enable].
Boot Sequence Press [Enter] to display the
boot sequence.
• CD-ROM Drive
• Diskette
• Hard Drive
• Legacy LAN Card
Sets the order of selected drives to boot the OS. Use
the [+] [-] keys to change the order of priority for
the selected device. Booting from a selected device
can be disabled with the [Space] key. (The mark "!"
is prefixed to the name of the disabled device.) If a
non-existing device is displayed, delete it from the
list with the [*] key.
table: Items on the Boot Options Submenu
Item Setting Description