Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 182)

182
Chapter 7 Installing Internal Options
7.4 Installing Memory Modules
Additional memory will help to increase the amount of data to read at a time and
improve the server processing capability.
• Before installation or removal, turn off the server and all peripheral devices.
Also unplug all power cables from the server. Failure to do so may cause
electric shock ( "1.4.3 Turning Off the Server" (pg.33)).
• Do not install unauthorized third party memory modules. Doing so may cause
electric shock, a fire, or failures.
• Wait for a sufficient period of time after server shutdown before installing or
removing memory. Failure to do so may cause burns.
• When installing or removing memory modules, make sure to remove the
screws on the specified points only. Failure to do so may cause injury or device
failures.
• Touch only the specified part of the printed circuit board.
Failure to do so may cause injury or device failures.
• The circuit boards and soldered parts of internal options are exposed. They
can be damaged by static electricity.
Before handling them, first touch a metal part of the server to discharge static
electricity.
• Do not insert and remove memory modules repeatedly. Doing so may cause
failures.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic part or
the edge of the circuit boards.