Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 218)

218
Chapter 7 Installing Internal Options
■ Connection of Other External SCSI Options
External SCSI options with different SCSI-IDs are connected in a daisy chain as shown in the following
figure. Up to two devices can be connected.
■ Notes on Connecting External SCSI Options
● SCSI-ID Setting
Do not use the same setting for different devices.
● Terminator
Install a terminator to the external SCSI option at the end of the daisy chain.
Alternatively, use the auto termination function of the external SCSI option.
Be sure to use the terminator supplied with a SCSI device only on that device.
● SCSI Cable
Select the SCSI cable for connecting a SCSI device depending on usage.
table: SCSI cable list
Connected device
Model name Length Remarks
External device Server
External SCSI option
(Half-pitch 68 pins) SCSI Ctrl U160 lp (PG-130L)
(VHDCI 68 pins) GP5-846 2m Sold separately
PRIMERGY SX10
(Half-pitch 68 pins) SCSI Ctrl U160 lp (PG-130L)
(VHDCI 68 pins) PG-CBLS007 1.8m Sold separately
PRIMERGY SX10
(Half-pitch 68 pins) SCSI Ctrl U160 lp (PG-130L)
(VHDCI 68 pins) PG-CBLS008 5.0m Sold separately
External SCSI option
(Half-pitch 68 pins) SCSI Ctrl U160 (PG-128)
(Half-pitch 68 pins) - - Supplied with
external SCSI
options
Backup cabinet PG-R1BC4
(Half-pitch 68 pins) SCSI Ctrl U160 (PG-128)
(Half-pitch 68 pins) PG-CBLS001 1.5m Sold separately
Backup cabinet PG-R1BC4
(Half-pitch 68 pins) SCSI Ctrl U160 (PG-128)
(Half-pitch 68 pins) PG-CBLS002 5.0m Sold separately
SCSI cable
(Attached item to the external SCSI option)
<External SCSI option> <The server>
SCSI cable
(For PG-128: attached item to the external SCSI option,
For PG-130L: GP5-846: sold separately)
SCSI Ctrl U160/ SCSI Ctrl U160 lp (PG-128/PG-130L)
Terminator
(Attached item to the external SCSI option,
or optional auto termination function)