Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 254)

254
Chapter 9 Operation and Maintenance
■ Cleaning the Mouse
Wipe the surface with a soft, dry cloth. If the tracking ball does not spin or roll smoothly, remove the ball
and clean it.
●
Cleaning Method
1
Remove the cover from under the mouse.
Remove the cover under the mouse by rotating it in the direction of the arrow.
2
Remove the ball and rinse it with water.
Flip the mouse over to remove the ball. Afterwards, wash it with water.
3
Clean the inside of the mouse.
Wipe the inside of the mouse, the roller, and the bottom cover with a damp cloth.
4
Insert the ball and apply the cover.
After the ball and inside of the mouse are dry, insert the ball and apply the cover.
Roller