Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 74)

74
Chapter 3 OS Installation Using ServerStart
2
Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
3
Click [ServerStart Status Diskette Floppy Disk].
A message prompting you to insert the floppy disk appears.
4
Insert the ServerStart floppy disk supplied with the server and click [OK].
Set the ServerStart floppy disk in the write-enabled state.
Creation of a ServerStart floppy disk starts. When the creation is completed, the "Floppy disk has
been created." message appears.
5
Click [OK].
6
Click [ (HOME)] on the tool bar.
The display returns to the [Welcome to ServerStart] window.
7
Click [Click here to prepare an operating system installation for a PRIMERGY
Server].
The [Prepare the installation of an operating system for PRIMERGY Servers] window appears.
Before starting installation, click [Cautions for Installation] and read the contents. Important
information such as limitations on disk configuration is described.
8
Click [Creation of a ServerStart Configuration file for the installation of an
Microsoft Windows Operating System].
The [Microsoft Windows Operating System Installation] window appears.