Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 228)

228
Chapter 8 Hardware Configuration/Utilities
8.2.4 Boot Options Submenu
Appears when [Boot Options] is selected from the [Main] menu.
Sets system startup options.
table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Halt On All Errors (Fixed
parameter) Sets whether or not to stop the boot process and
shut down the system, in case a POST (Power On
Self Test) error is detected.
• No Halt On Any Errors
It does not stop the boot process. Detected errors
are ignored.
• Halt On All Errors
When a POST (Power On Self Test) error is
detected, it stops the boot process and shuts
down the system when POST is completed.
Keyboard Check • Disabled
• Enabled (at the time of
purchase)
Sets whether or not to check keyboard connection
during POST.
SM Error Halt Disabled (Fixed parameter) Sets the procedure in case an error occurs regarding
the fan or temperature sensor.
Fast Boot Disabled (Fixed parameter) Sets whether or not to reduce the scope of POST
and thereby speed up system startup.
Quiet Boot Disabled (Fixed parameter) Sets whether or not to display the logo screen
instead of POST information.
PhoenixBIOS Setup Utility
Item Specific Help
Main
F1
Esc
Select Item
Select Menu
Change Values
Select Sub-Menu
-/+
Enter
Info
Exit
F9
F7
Setup Defaults
Previous Values
POST Errors: [Halt On All Errors]
Keyboard Check: [Enabled]
SM Error Halt: [Disabled]
Fast Boot: [Disabled]
Quiet Boot: [Disabled]
Boot Menu: [Enabled]
MultiBoot for HDs
[Disabled]
Boot Options
Boot Sequence: