Primera Technology Fujitsu Tape Drive RX300 S2 - Manual (Page 199)

199
PRIMERGY RX300 S2 User’s Guide
Inst
allin
g I
nte
rn
al O
pti
ons
7
■ Installing an Expansion Card in Slots 6 to 8 (With Basic Card Slot
Conversion Kit)
1
Turn off the server and peripheral devices and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.174)
2
Touch a metal part of the server to discharge static electricity.
3
Remove the riser card.
Loosen the screws that fix the riser card and rear side of the server, then pull up and remove the
riser card.
4
Remove the slot cover from the riser card.
Pull out the screws, and remove the slot cover.
Be sure to keep the removed slot cover for later use.
Thumbscrews
Riser card
Screw