NEC uPD78056Y - Manual (Page 582)

582
APPENDIX B DEVELOPMENT TOOLS
B.1 Language Processing Software
RA78K/0 A program that converts a program written in mnemonic into object
Assembler Package codes that microcomputers can process.
Provided with functions to automatically perform generation of symbol
table, optimizing processing of branch instructions, etc.
Used in combination with separately available Device File (DF78054).
<Precautions for the use in PC environment>
Although Assembler Package is a DOS-based application, it can be
used in a Windows environment through the use of Project Manager
(included in Assembler Package) on Windows.
Part number:
µ
SxxxxRA78K0
CC78K/0 A program which converts a program written in C language into
C Compiler Package object codes that microcomputers can process.
Used in combination with separately available Assembler Package
and Device File.
<Precautions for the use in PC environment>
Although C Compiler Package is a DOS-based application, it can be
used in Windows environment through the use of Project Manager
(included in Assembler Package) on Windows.
Part number:
µ
SxxxxCC78K0
DF78054 Note A file which contains information peculiar to the device.
Device File Used in combination with separately available tools (RA78K/0, CC78K/0,
SM78K0, ID78K0-NS, ID78K0).
Supporting OS and host machines are dependent on the tool to be
combined with.
Part number:
µ
SxxxxDF78054
CC78K/0-L A source file of functions which configure the object library included
C Library Source File in C Compiler package.
Required when modifying the object library included in C Compiler
Package for customization.
Since this is a source file, its operation environment is independent
from OS.
Part number:
µ
SxxxxCC78K0-L
Note The DF78054 can commonly be used for all the products of the RA78K/0, CC78K/0, SM78K0, ID78K0-
NS, and ID78K0.