NEC uPD78056Y - Manual (Page 589)

589
APPENDIX B DEVELOPMENT TOOLS
B.4 OS for IBM PC
The following OSs are supported for IBM PC.
Table B-1. OS for IBM PC
OS Version
PC DOS Ver. 5.02 to Ver. 6.3
J6.1/V Note to J6.3/V Note
IBM DOS™ J5.02/V Note
MS-DOS Ver. 5.0 to Ver. 6.22
5.0/V Note to 6.2/V Note
Note Only English mode is supported.
Caution MS-DOS ver. 5.0 or later has a task swap function, but it cannot be used
with the above software.
B.5 Upgrading Former In-circuit Emulators for 78K/0 Series to IE-78001-R-A
If you have a former in-circuit emulator for the 78K/0 Series (IE-78000-R or IE-78000-R-A), your in-circuit emulator
can be upgraded to be equivalent to the IE-78001-R-A in-circuit emulator by simply replacing the break board with
the IE-78001-R-BK (under development).
Table B-2. Upgrading Former In-circuit Emulators for 78K/0 Series to IE-78001-R-A
In-circuit Emulator Cabinet Upgrading Note Board to be Purchased
IE-78000-R Required IE-78001-R-BK
IE-78000-R-A Not required
Note To upgrade your cabinet, bring it to NEC.