NEC uPD78056Y User Manual
Page 600
600
APPENDIX E REVISION HISTORY
Edition
Major revisions from previous version
Revised Chapters
4th
Addition of following package to all devices:
Throughout
edition
• 80-pin plastic QFP (14
×
14 mm, resin thickness: 1.4 mm)
(under planning)
Addition of following package to
µ
PD78058
• 80-pin plastic TQFP (fine pitch) (12
×
12 mm)
Addition of description to Caution in Figure 8-6. 16-Bit Timer
CHAPTER 8
16-BIT TIMER/EVENT COUNTER
Output Control Register Format
Change of Figure 11-3. Watchdog Timer Mode Register Format
CHAPTER 11 WATCHDOG TIMER
and addition of Note and Caution
Addition of caution on serial I/O shift register 0 (SIO0) of
CHAPTER 17 SERIAL INTERFACE CHANNEL 0
µ
PD78054Y subseries
(
µ
PD78054Y Subseries)
Correction of Figure 17-22. Data Transmission from Master to
Slave (Both Master and Slave Selected 9-Clock Wait)
Correction of Figure 17-23. Data Transmission from Slave to
Master (Both Master and Slave Selected 9-Clock Wait)
Addition of (3) Slave wait release (slave reception) to 17.4.5
Cautions on use of I
2
C bus mode
Addition of 17.4.6 Restrictions in I
2
C bus mode
Addition of Caution to Figure 18-5. Automatic Data Transmit/
CHAPTER 18 SERIAL INTERFACE
Receive Interval Specify Register Format
CHANNEL 1
Addition of Caution to 18.4.3 (3) (d) Busy control option
Addition of description on port mode register 12 (PM12)
CHAPTER 20 REAL-TIME OUTPUT PORT
Addition of following products:
APPENDIX A DEVELOPMENT TOOLS
IE-78000-R-A, IE-70000-98-IF-B, IE-70000-98N-IF,
APPENDIX B EMBEDDED SOFTWARE
IE-70000-PC-IF-B, IE-78000-R-SV3, SM78K0, ID78K0, MX78K0
Addition of IBM PC/AT compatible machine as host machine
Change of supported OS version
Addition of APPENDIX C REGISTER INDEX
APPENDIX C REGISTER INDEX