Zebra Technologies Z4Mplus User Manual
Page 116
Advertising
Routine Maintenance
Cleaning Procedures
108
13163L-001 Rev. A
Z4Mplus/Z6Mplus User Guide
1/18/06
5.
While manually rotating the pinch roller, clean it thoroughly with the swab from the
Preventive Maintenance Kit (part number 47362) or a solution of 90% Isopropyl alcohol
and 10% deionized water and a cotton swab. Allow the solvent to evaporate.
6.
Use the swab to remove excess adhesive from the tear-off/peel-off bar. Allow the solvent
to evaporate.
7.
Close the printhead assembly.
Important •
Apply minimum force when cleaning the tear-off/peel-off bar. Excessive
force can cause the tear-off/peel-off bar to bend, which could have a negative effect on
peel performance.
Advertising