Print a network configuration label – Zebra Technologies Z4Mplus User Manual
Page 80
Configuration
Print a Network Configuration Label
72
13163L-001 Rev. A
Z4Mplus/Z6Mplus User Guide
1/18/06
Print a Network Configuration Label
If you are using a print server, you can print a network configuration label after the printer is
connected to the network.
To print a network configuration label, complete these steps:
1.
On the control panel, press
SETUP/EXIT
.
2.
Press
NEXT
or
PREVIOUS
to scroll through the parameters until you reach
LIST NETWORK
.
3.
Press the right oval to confirm printing.
A network configuration label prints (
). An asterisk designates whether the
wired or wireless print server is active. If no wireless print server is installed, the wireless
portion of the label does not print.
Figure 28 • Network Configuration Label (With a Wireless Print Server Installed)