Zebra Technologies Z4Mplus - Manual (Page 47)

39 Operations
Load Media in Peel-Off Mode or Liner Take-Up Mode
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
Remove Liner in Peel-Off with Liner Take-up Mode
To remove liner when in Peel-Off with Liner Take-Up mode, complete these
steps:
1. See Figure 17 . Pull the liner slide tab (
1
) toward you until it stops about a third of the way
down the liner take-up spindle (
2
).
Figure 17 • Removing Liner from Liner Take-up Spindle
2. Slide the liner from the take-up spindle.
Note • The liner slide moves back in place after the liner is removed.
2
1