Zebra Technologies Z4Mplus - Manual (Page 54)

Operations
Load Media in Rewind Mode 46
13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06
4. Lift the printhead until it latches open.
5. Slide out the media guide.
6. Feed the media under the dancer assembly (
1
), through the slot in the transmissive sensor
(
2
—standard transmissive sensor shown), and under the ribbon sensor (
3
).
7. Push down the peel-off mechanism release lever to open the peel assembly.
1 2 3