Zebra Technologies Z4Mplus - Manual (Page 91)

83 Configuration
Control Panel LCD Displays
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
Print Sensor Profile
The sensor profile may be used to troubleshoot registration problems that
may be caused when the media sensor detects preprinted areas on the media
or if it experiences difficulty in determining web location.
Figure 31 shows a sensor profile. If the sensitivity of the media and/or
ribbon sensors must be adjusted, use Calibrate Media and Ribbon Sensor
Sensitivity on page 84 to adjust sensor sensitivity.
Figure 31 • Sensor Profile
To print a sensor profile:
1. Press SELECT to select the parameter.
2. Press PLUS (+) to start this standard calibration procedure and print a
media sensor profile.
3. Press SELECT to accept any changes and deselect the parameter.
Table 9 • Printer Parameters (Page 11 of 23)
Parameter Action/Explanation
SENSOR PROFILE
PRINT