Zebra Technologies Z4Mplus - Manual (Page 57)

49 Operations
Load Media in Rewind Mode
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
13. Slide the rewind media guide all the way out, and then fold it down.
14. Slide an empty core onto the rewind spindle.
15. Wrap the liner around the core and turn the rewind spindle counterclockwise to wind up
the excess liner. The liner must be attached to the rewind spindle for the printer to operate
properly. Ensure that the edge of the liner is flush against the backplate of the rewind
spindle.
16. Fold up the rewind media guide, and then slide it in until it touches the liner.