Zebra Technologies Z4Mplus - Manual (Page 45)

37 Operations
Load Media in Peel-Off Mode or Liner Take-Up Mode
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
9. Remove the exposed labels so that only the liner remains.
10. Feed the liner over the tear-off/peel-off bar (
1
) and behind the peel assembly (
2
). Make
sure that the end of the liner falls outside of the printer.
11. Push the media to the back of the transmissive sensor (
1
). Slide in the media guide (
2
)
until it just touches the edge of the media.
1
2
1
2