Zebra Technologies Z4Mplus - Manual (Page 44)

Operations
Load Media in Peel-Off Mode or Liner Take-Up Mode 36
13163L-001 Rev. A Z4Mplus/Z6Mplus User Guide 1/18/06
6. Feed the media under the dancer assembly (
1
), through the slot in the transmissive
sensor (2—standard transmissive sensor shown), and under the ribbon sensor (
3
).
7. Push down the peel-off mechanism release lever to open the peel assembly.
8. Pull approximately 18 in. (500 mm) of media through the front of the printer.
1 2 3