Zebra Technologies Z4Mplus - Manual (Page 55)

47 Operations
Load Media in Rewind Mode
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
8. Pull approximately 18 in. (500 mm) of media through the front of the printer.
9. Remove the exposed labels so that only the liner remains.
10. In which mode do you wish to operate?
To operate in... Then...
Peel-Off mode
(without rewind or
liner take-up) 1. Feed the liner over the tear-off/peel-off bar and behind the
peel assembly. Make sure that the end of the liner falls
outside of the printer.
2. Continue with step 18 on page 50 .
1
2
1
Tear-off/peel-off bar
2
Peel assembly