Zebra Technologies Z4Mplus - Manual (Page 29)

21 Printer Setup
Select a Communication Interface
1/18/06 Z4Mplus/Z6Mplus User Guide 13163L-001 Rev. A
IEEE 1284 Bidirectional Parallel A common communication method available on most
PCs and other hosts.
• Advantages: Fastest of the communication interfaces; cables and connectors are readily
available from computer equipment stores and suppliers; two-way communication
between the host and the printer; easy to connect.
• Disadvantages: Shorter recommended cable length of 6 feet (1.83 m) with a maximum of
length 10 ft (3 m); many computers are equipped with only one parallel port, allowing
only one IEEE 1284 bidirectional device to be connected at a time.
Figure 10 • Communicating Using a Parallel Port
Optional Print Servers Ethernet-based print servers also are available to connect your
printer to a data source. Both wired and wireless options are available.
• With the ZebraNet Wireless Print Server board installed, a wireless PCMCIA card can be
used to communicate with a network. For more information on this option, see the
ZebraNet Wireless Print Server User Guide.
• ZebraNet 10/100 Print Server (10/100 PS). For more information on 10/100 PS, see the
ZebraNet 10/100 Print Server User and Reference Guide.
1
36-pin male connector, attaching to printer
2
25-pin male connector, attaching to computer
3
Maximum cable length = 10 ft. (3 m)
Printer Computer
1
2
3