Accusys ExaRAID GUI - Manual (Page 129)

Using the LCD Console
3-6
3.3 Menu
3.3.1 Menu Tree
Use the UP or DOWN arrow buttons to scroll through the menu. Press the
ENT button to enter the selected setting. To exit the menu, press ESC. The
menu tree hierarchy is as shown below:
3.3.2 Creating an Array
In the Quick Setup menu, users can create disk arrays quickly and easily.
Configure the following items to create the array. See the options as
below.
Use the UP and DOWN buttons to scroll through the options. Press the ENT
button to select. To cancel the selection and return to the previous level,
press the ESC button.
RAID Level Level 0 (default), Level 3, Level 5, Level 6, Level 10, Level
30, Level 50, Level 60
Spare Disk # Default, 1, 2, 3, 4
Init. Method Background, Foreground (default), No Init
System Info
Quick Setup
Terminal Port
System Setup
Ethernet Setup
Sys. Model Name
Controller Model
Boot Code
F/W Version
RAM
BP ID
IP Address
RAID Level
Baud Rate
Shutdown
Passwd Setup
Save Config
Select CTL ID
Spare Disk #
Stop Bit
Passwd ENABLE
Save&Restart
Set DHCP
Status
Flow control
Factory Default
Gateway DNS
Parity
Restart
Net mask
Init. Method
Data Bit
Change Passwd
Save to NVRAM
IP Address
MAC Address
Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Level 6
Figure 3-2 Menu tree