Accusys ExaRAID GUI - Manual (Page 45)

Using the RAID GUI
2-5
2.2 Monitor Mode
RAID GUI monitors the status of your RAID controller(s) through your
Ethernet connection. The RAID GUI window first displays the Monitor
Mode. This mode is also the login to enter Config Mode. The GUI
components shown are introduced in the following sections.
At the front view panel, there are 16 or 24 HDD trays displayed in the
redundant-controller system. Depending on the redundant-controller
system model, the number of HDDs may differ. Besides a maximum of
eight enclosures can be connected to the subsystem serially while the
single subsystem supports up to seven enclosures. For more information
about the indications of HDD status code and color, see 2.2.1 HDD state
on page 2-6.
Figure 2-6 Single controller GUI monitor mode
Figure 2-7 Redundant-controller system GUI monitor