Accusys ExaRAID GUI - Manual (Page 59)

Using the RAID GUI
2-19
2.4 Config Mode
To configure any settings under Config Mode, log in with admin and its
password. The Overview screen displays as below.
The RAID GUI Config Mode provides the following configuration settings.
Before configuration, read “Understanding RAID” thoroughly for RAID
management operations.
Quick Setup Allows you to configure your array quickly.
RAID
Management
Allows you to plan your array.
Maintenance
Utilities Allows you to perform maintenance tasks on your
arrays.
Hardware
Configurations Allows you to configure the settings to hard disks,
FC/SAS ports, and COM port settings.
Event
Management Allows you to configure event mail, event logs,
and UPS settings.
System
Management
Allows you to erase or restore the NVRAM
configurations, set up the mail server, update the
firmware and boot code and so on.
Performance
Management Allows you to check the IO statistics of hard disks,
caches, LUNs, and FC/SAS ports.
Figure 2-18 Overview screen