Accusys ExaRAID GUI - Manual (Page 166)

Using the CLI Commands
4-35
4.9.3 Administration security control
Command ntpsync
Synopsis ntpsync
Description
Immediately synchronize controller’s time with network time
server.
Command datelist
Synopsis datelist
Description
List current date, time, time zone, and DST (Daylight Saving
Time) setting on the controller. If the controller time is
synchronized with a NTP server, it also shows the IP address of
the NTP server and whether the controller can connect to
the NTP server.
Command login
Synopsis login username [-t target_controller]
Description Login into CLI with an account and its password.
Parameters
username: enter the user name
[-t target_controller]: enter the IP address of the RAID
subsystem the users want CLI to log in
Command passwd
Synopsis passwd user/admin old_password new_password
Description Set or change the password for an account.
Parameters
old_password: enter the old password
new_password: enter the new password
Command passwdchk
Synopsis passwdchk user/admin [on/off]
Description
Review or set password checking for an account.
Show or change the setting of password check for an
account.
Parameters [on/off]: enable or disable the password check