Accusys ExaRAID GUI - Manual (Page 142)

Using the CLI Commands
4-11
4.3.3 Task priority control
4.3.4 Task schedule management
Command hddutilpri
Synopsis hddutilpri [priority]
Description Show or set the utilities task priority of non-DG hard disks.
Parameters [priority]: low, medium, or high
Command dgrebpri
Synopsis dgrebpri dgx priority
Description Set the rebuild task priority of a disk group.
Parameters priority: low, medium, or high
Command dginitpri
Synopsis dginitpri dgx priority
Description Set the initialization task priority of a disk group.
Parameters priority: low, medium, or high
Command dgutilpri
Synopsis dgutilpri dgx priority
Description Set the utilities task priority of a disk group.
Parameters priority: low, medium, or high
Command schedulecreate
Synopsis
schedulecreate [-s YYYY/MM/DD/hh/mm]/[-m DD/hh/mm]/
[-w WD/hh/mm] command
Description
Create a schedule or a periodic schedule for a CLI
command.
Parameters
[-s YYYY/MM/DD/hh/mm]: the target date/time
[-m DD/hh/mm]: monthly
[-w WD/hh/mm]: weekly
command: commands allowed to be scheduled include
dgexpand, dgdefrag, ldmigrate, ldexpand, hddclone,
diskcrub, regparity and hdddst
Command scheduledelete
Synopsis scheduledelete schedule_id
Description Delete a schedule with the schedule ID.