Accusys ExaRAID GUI - Manual (Page 286)

Appendix
C-2
There are eight items in the Boot Utility menu.
C.1 (N) Set IP address
The Boot Utility allows you to update the Boot ROM and System ROM. First
you need to set the controller and server IP addresses. Press [N] to enter the
settings.
1. Set the Board IP address and press [Enter].
2. Set the Server IP address and press [Enter].
3. Press [Y] to save the settings.
If your system supports redundant controller, press [N] and you are required
to set the following IP addresses.
1. Set the Server IP address and press [Enter].
2. Set the Local IP address and press [Enter].
3. Set the Local IP mask address and press [Enter].
4. Set the Gateway address and press [Enter].
(N) Set IP address
(L) Load Image by TFTP
(B) Update Boot ROM
(S) Update System ROM
(H) Utility menu
(P) Set Password
(R) Restart system
(Q) Quit & Boot RAID system