Accusys ExaRAID GUI - Manual (Page 153)

Using the CLI Commands
4-22
4.5.5 Management network interface
Command fcpwwnn
Synopsis fcpwwnn identical/distinct
Description
Set the World-Wide Node Name of FC port to be identical or
distinct. Without option, this command shows the current
setting.
Command fcplisthost
Synopsis fcplisthost fcpx/all
Description List the detected hosts of an FC port or all FC ports.
Command fcplistusrconf
Synopsis fcplistusrconf fcpx/all
Description List the user’s configurations of an FC port or all FC ports.
Command fcplistusrconf
Synopsis fcplistcurconf fcpx/all
Description List the current configurations of an FC port or all FC ports.
Command fcprate
Synopsis fcprate fcpx/all 1gb/2gb/4gb/auto
Description Set the prefered data rate of an FC port or all FC ports.
Command ethsetaddr
Synopsis
ethsetaddr ethx method [-a] ip_addr [-s] net_mask [-g]
gw_addr [-d] dns_addr [-z] on/off
Description Set IP address of an Ethernet port.
Parameters
method: static or dhcp
[-a]: network address
[-s]: network mask
[-g]: gateway address
[-d]: DNS server address
[-z]:Automatic Private IP Addressing (APIPA)
Command ethlistaddr
Synopsis ethlistaddr ethx
Description List IP and MAC address of an Ethernet port.