Accusys ExaRAID GUI - Manual (Page 156)

Using the CLI Commands
4-25
4.5.8 Uninterruptible power supply
Command enclist conf
Synopsis enclistconf
Description List enclosure configurations.
Command encidentify
Synopsis encidentify on/off encx
Description
Enable or disable identifying the enclosure with a visual
indication. This command is applicable only when enclosure
visual indication hardware is available.
Command encfwupdate
Synopsis enfwupdate encx firmware.bin
Description
Update the firmware of the controller in an external
enclosure with the specified firmware file.
Command upscontrol
Synopsis upscontrol on/off
Description Enable or disable UPS support.
Command upslist
Synopsis upslist
Description List UPS information.
Command upsconfig
Synopsis
upsconfig [-d YY/MM/DD] [-l xxsec] [-r xx%] [-s xxsec]
[-b xxsec]
Description
Set UPS configurations. At least one option should be
assigned.
Parameters
[-d YYYY/MM/DD]: date of last battery replacement
[-l xxsec]: low battery runtime threshold
[-r xx%]: minimum battery charge capacity before restart
[-s xxsec]: UPS delay power off in seconds
[-b xxsec]: UPS delay power on in seconds