Accusys ExaRAID GUI - Manual (Page 165)

Using the CLI Commands
4-34
4.9.2 Time management
Command configset
Synopsis configset config.bin
Description
Store a file, config.bin, as the controller’s main configurations
on NVRAM.
Command configtext
Synopsis configtext config.html
Description Get the main configurations and save to a html file.
Command configtextmail
Synopsis configtextmail account
Description
Get the main configurations and save to a text file, which is
then sent to the specified mail receiver.
Command confighdd
Synopsis confighdd [frequency]
Description
Show or update the progress of background tasks except
reconfiguration task.
Parameters [frequency]: high, medium, or low
Command dateset
Synopsis dateset static/ntp [-t YYYY/MM/DD/hh/mm]/[-n xxx.yyy.zzz]
Description Set the current date and time on the controller.
Parameters
[-t YYYY/MM/DD/hh/mm]: date and time. This is valid only
when static is specified.
[-n xxx.yyy.zzz]: NTP server network address. This is valid only
when ntp is specified.
Command timezoneset
Synopsis
timezoneset -z Area/Location [-d on/off]
timezoneset -i
Description Set the time zone.
Parameters
[-i]: Interactive mode
[-z Area/Location]: Time zone name of area and location
[-d on/off]: Daylight saving time (DST) setting