Accusys ExaRAID GUI - Manual (Page 151)

Using the CLI Commands
4-20
4.5.2 SAS ports
4.5.3 SCSI ports
Command hddqueue
Synopsis hddqueue on/off
Description Enable or disable the IO queuing of hard disks.
Command hdddelayaccess
Synopsis hdddelayaccess [-b] xxsec
Description
Specify the delay time before the controller tries to access
the hard disks after power-on.
Parameters [-b]: boot-up delay access time
Command hddverify
Synopsis hddverify on/off
Description
Enable or disable the write commands for initialization or
rebuilding data on logical disks.
Command hddlistconf
Synopsis hddlistconf
Description List the current hardware configurations of all hard disks.
Command sasname
Synopsis sasname sasx name
Description
You can sets the name of a SAS port, sasx, as name. The
default is “sasx”.
Command saslistcurconf
Synopsis saslistcurconf sasx/all
Description
Displays the current configurations of a SAS port (sasx) or all
SAS ports (all).
Command scpname
Synopsis scpname scpx name
Description
You can sets the name of a SCSI port, scpx, as name. The
default is “scpx”.