Accusys ExaRAID GUI - Manual (Page 136)

Using the CLI Commands
4-5
4.2.5 Logical disks
Command dgrebseq
Synopsis dgrebseq dgi par/seq/pri [-l ldx,ldy, ...]
Description Set rebuild mode of a disk group.
Parameters
par/seq/pri: parallel, sequential, or priority
[-l ldx,ldy, ...]: priority of logical disks to rebuild
Command globalspare
Synopsis globalspare add/remove hddx hddy ...
Description Add or remove one or more hard disks as global spare disks.
Command autospare
Synopsis autospare [on/off]
Description Review or set the auto spare settings.
Parameters [on/off]: turn on or off the auto spare option
Command restorespare
Synopsis restorespare [on/off]
Description Review or set the restore spare settings.
Parameters [on/off]: turn on or off the restore spare option
Command ldcreate
Synopsis
ldcreate dgxldy capacity raidlevel [-s stripesize] [-i initopt]
[-f x] [-o offset] [-n name] [-c ctlx]
Description Create a logical disk.
Parameters
capacity: logical disk capacity
raidlevel: raid0, raid5, raid3, raid1, raid6, raid10, or nraid
[-s stripesize]: stripe size
[-i initopt]: initialization method
[-f x]: free chunk
[-o sector]: alignment offset
[-n name]: the name of a logical disk
[-c ctlx] (for redundant controller only): the preferred
controller of a logical disk