Accusys ExaRAID GUI - Manual (Page 285)

Appendix
C-1
Appendix C: Boot Utility
Follow the steps below to enter the Boot Utility menu:
1. Run HyperTerminal (or the terminal program used to establish an RS232
connection with your RAID system) and open the connection
established with your RAID system.
2. Turn on the RAID system, the terminal shows the version, CPU and
memory information.
3. You can press [ESC] to skip the memory test, and press [Ctrl+B] to enter
the Boot Utility.
RS232 COM
Port Setting Bits per second: 115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None