Accusys ExaRAID GUI - Manual (Page 133)

Using the CLI Commands
4-2
• Hard disk: hddx
• JBOD disk: jbdx
• Disk group: dgx
• Logical disk: dgxldy
• Volume: volx
• Host: hostx
• Storage group: sgx
• Host group: hgx
• Logical unit: lunx
• Fiber port: fcpx
• Serial SCSI port: sasx
• Controller: ctlx
• Management network port: ethx
• Enclosure: encx
Options
Options are expressed in the form of [-x ... ], where -x is the identifier of the
option.
Selectable arguments
When more than one value can be used in an argument, they are listed
with “/” in between. Users may choose one among them.
Controller modifier
In a dual-controller system, hardware such as the host interface ports is
exactly the same on the two controllers. To specify which controller the
hardware to be selected in CLI, a controller modifier is added. For example,
to refer to the first FC port in controller A, the identifier is °ßfcpa1°®. Without
the modifier, all identifiers are referring to local controller (the controller that
user logs in currently).
See all the CLI commands and the descriptions in the following sections.
4.2 Basic RAID Management
4.2.1 Hard disks
Command hddadd
Synopsis hddadd hddx hddy ...
Description Add hard disks.