Accusys ExaRAID GUI - Manual (Page 171)

Using the CLI Commands
4-40
4.11 Configuration shortcuts
4.11.1 RAID quick setup
4.11.2 Performance profile
Command raidquick
Synopsis raidquick [-r raidlevel] [-i initopt] [-s spare_no]
Description
Initialize RAID configurations and LUN mapping according to
the specified.
[For single controller model]
A volume (for raid30, raid50, or raid60) or a logical disk (for
other RAID levels) will be created with all capacity of all
local data member disks and it will be mapped to the LUN 0
of the default storage group of all host ports. All other
controller configurations will remain unchanged and all RAID
parameters will use the default values. If there is any error
during the quick setup, all hard disks will return to the unused
state.
[For Redundant controller model]
Two volumes (for raid30, raid50, or raid60) or two logical disks
(for other RAID levels) will be created with all capacity of all
local data member disks and the preferred controller of one
volume or logical disk is assigning to controller A and the
other one is assigned to controller B. They will be mapped to
the LUN 0 and LUN 1 of the default storage group of all host
ports on both controllers for MPIO failover mode or to the
LUN 0 of the default storage group of all host ports on the
preferred controller for Multiple-ID failover mode. All other
controller configurations will remain unchanged and all RAID
parameters will use the default values. If there is any error
during the quick setup, all hard disks will return to the
unusedstate.
Parameters
[-r raidlevel]: RAID level
[-i initopt]: initialization method
[-s spare_no]: the number of global spare disks.
Command perfprofile
Synopsis perfprofile [avstream/maxiops/maxthruput/off]
Description Select the performance profile to apply
Parameters
[avstream/maxiops/maxthruput/off]: AV application,
maximum IO per second, maximum throughput, or off.