Accusys ExaRAID GUI - Manual (Page 135)

Using the CLI Commands
4-4
4.2.3 Disk groups
4.2.4 Spare and rebuild
Command dgcreate
Synopsis
dgcreate dgi hddx hddy ... [-n name] [-i par/seq] [-z]
[-s hddz,hdda, ...] [-t capacity]
Description Create a disk group with member disks.
Parameters
[-n name]: the name of a disk group
[-i par/seq]: logical disk initialization mode (parallel or
sequential)
[-z]: write-zero immediately
[-s hddz,hdda, ...]: local spare disks
[-t capacity]: capacity to truncate
Command dgdelete
Synopsis dgdelete dgi
Description Delete a disk group.
Command dgname
Synopsis dgname dgx name
Description Name a disk group.
Command dginit
Synopsis dginit dgi par/seq
Description Set initiation mode of a disk group.
Command dglist
Synopsis dglist dgx/all
Description List the status of one or all disk groups.
Command dgunload
Synopsis dgunload dgx
Description
Unload the specity disk group from system. After the
command is executed, the disk group and all logical disks of
the disk group will be removed from system and state of all
member disks of the disk group will be CONFLICT.
Command dgspare
Synopsis dgspare add/remove dgi hddx
Description Add or remove a local spare in a disk group.