EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 100)

Base Config.
Description Mode the EVS server is working in.
The base configurations available depend on the server type,
and on the valid license codes.
Values • Multicam LSM:
mode where the EVS server is controlled by the Remote
Control Panel or from the Multicam production screens.
• Replay-Only LSM:
restricted Multicam LSM mode without playlist
management, split audio, nor support of hypermotion
cameras.
• Video Delay:
mode where the server is used to play out the input with a
video delay.
• Spotbox:
mode where the EVS server can be controlled by industry-
standard protocols: Sony BVW75, VDCP, Odetics, DD35,
EVS’ AVSP, IPDP, EditRec or LinX API, or from the
Multicam production screens.
• XSense:
mode where the EVS server can be controlled by the
XSense Remote Panel or from the Multicam production
screens.
• Server:
mode where the EVS server can only be controlled by the
supported industry-standard protocols, but not from the
Multicam production screens.
Default value Multicam LSM
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 90