External offside, Ip address, Default tool – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 222: Auto mark
External offside
Description
Activates or deactivates the control of Epsio application from
the remote when the Offside line parameter is set to Yes.
Values
•
Yes:
The Epsio application and the related features (of which
the offside line) are active and the SHIFT+D key gives
access to the Epsio menu.
•
No:
The offside line feature built in the EVS server is active and
the SHIFT+D key gives access to the offside menu.
Default value
No
IP address
Description
Defines the IP address of the Epsio workstation on the
network when the Epsio connection is enabled via the
External offside parameter.
Values
xxx.xxx.xxx.xxx
Default value
192.168.10.50
Default tool
Description
Selects the tool used by default in the Epsio menu on the
remote when the Epsio connection is enabled via the External
offside parameter.
Values
•
Offside
•
Arrow
•
Circle
•
Graphics
Default value
Offside
Auto mark
Description
Activates / deactivates the automatic insertion of a cue point
on the record train every time the Epsio operator enters the
Epsio menu on the remote.
Values
Yes / No
Default value
No
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
212