Supported formats, How to set the system date and time – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 37
Supported Formats
The supported date format is DD-MM-YYYY, as shown in the example below:
•
15-03-2011 for March 15, 2011
The supported time format is hh:mm:ss, as shown in the example below
•
22:58:00 for 22 h 58 min 00 sec (24-hour display)
A warning message will inform you if the format you try to use is not valid.
How to Set the System Date and Time
To set up the system date and time from the Multicam Setup window, proceed as follows:
1. In the Multicam Setup window, press T to call the System date and time command.
The following window opens:
2. In this window, type:
◦
the date in the DD/MM/YYYY format
◦
the time in the hh:mm:ss format (24-hour display)
using TAB to move from one field to the other.
3. Press ENTER to apply the changes to the system date and time.
The date and time you have entered here will automatically be taken into account when
you launch a configuration.
27
2. Multicam Setup
EVS Broadcast Equipment S.A. - November 2012
Issue 11.01.B