EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 210)

Pointing device
Description Specifies the pointing device connected to the EVS server,
and initializes it.
If the tablet is not properly calibrated, this function will re-
initialize it.
If you use the touch screen, it must always be connected to
RS422 port #6 of the server, and defined as such in the
Channels tab, Port settings.
Values Tablet / Touch Screen
Default value Tablet
VGA & Remote sync
Description Specifies whether and how the current clips machine, page
and bank of VGA screens and Remote Panel must be
synchronized.
Values The following values are possible:
• No:
Clip machine, page and bank can be selected
independently on the VGA screen and on the Remote
Panel.
• Yes:
Clip machine, page and bank are synchronized between
VGA screen and Remote Panel. Connecting to the clips of
a network machine or coming back to the clips of the local
machine, or selecting a new page or bank on one side will
be automatically reflected on the other.
• Server:
Clip pages and banks can be selected independently on
VGA and Remote Panel, but connecting to the clips of a
network machine or coming back to the clips of the local
machine on the VGA or Remote Panel will be
automatically reflected on the other.
Default value No
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 200