Time code settings, Time code settings for edit rec, Introduction – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 161: Serial sony ltc, Serial sony vitc
Time Code Settings for Edit Rec
Introduction
The Time Code settings allow specifying the timecode (TC) types used in various
communication protocols.
The following screenshot presents page 2 in advanced mode of the Protocol tab in the
server-based application and highlights the Time Code settings area.
Serial Sony LTC
Description
Specifies the type of timecode used in communications
between the Sony controller and the Edit Rec engine when the
controller works with the LTC.
Values
This field is not editable.
The value is always Edit TC, meaning the timecode of the
playlist based on the Start TC.
Serial Sony VITC
Description
Specifies the type of timecode used in communications
between the Sony controller and the Edit Rec engine when the
controller works with the VITC.
Values
•
Edit TC, the playlist timecode based on the defined Start
TC.
•
User TC, the clip timecode from the USER TC table.
Default value
Edit TC
151
3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012
Issue 11.01.B