EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 134)

UserBits
Description Enables/disables the insertion of the user bits in the SD
output.
When TC0 is selected for the D-VITC field, the user bits
values will also remain static and fixed to 00:00:00:00
whatever the selected value.
Values Yes (default) / No
CleanVBI
Description Specifies whether the VBI (Vertical Blanking Interface)
information needs to be cleaned on the output.
The VITC being recorded in the active video lines, it can be
disrupted in play var because of interpolation or parity violation
on some fields. Moreover, if the server inserts VITC on the
output while there is already VITC on another line, it can create
problems.
Values
• No (default) The VBI is not cleaned in the output.
• Always The VBI is always cleaned in the output.
• If not OK
The VBI is cleaned in the output if it is not
correct (play var mode, vertical split
screen, etc).
SMPTE Package Settings
Introduction
The SMPTE Package Management settings specify how ancillary data packets stored in
the vertical ancillary data space in HD and SD signals are handled.
These fields are available in the following interfaces:
• in the Multicam Configuration window, Channels tab, in the advanced display mode:
◦ on page 6, 7 or 8 on the server-based application.
◦ on page 1 on the web-based interface.
• partly in the Technical menu of the Remote Control Panel (T2.X).
The following screenshot highlights the SMPTE Package settings area, defined on page 8
of the Channels tab in the server-based application:
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration 124