Clip post-roll, Mark cue point, Preroll – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 187
Clip post-roll
Description
When the Post-Roll function is enabled from the secondary
clip menu, the clip will play through its OUT point for the
duration defined by the Clip post-roll parameter.
This is also valid inside record trains if the Record Train OUTs
parameter is set to 'Freeze'.
Values
From 00s00fr to 30s00fr
Default value
02s00fr
Mark cue point
Description
Specifies how the cue point timecode will be memorized.
Values
Two values are possible for this parameter:
•
Live:
Memorizes cue points based on the timecode of the LIVE
input.
•
Playback:
Memorizes cue points based on the timecode of the field
loaded on the main play channel.
Default value
Live
Preroll
Description
Preroll duration used when recalling a cue point.
Values
From 0s01fr to 5s00fr.
Default value
0s05fr
177
3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012
Issue 11.01.B