EVS XT2 Version 11.01 - November 2012 Configuration Manual - Manual (Page 189)

Freeze on cue points
Description Specifies whether Multicam will freeze or not when it reaches
a cue point marked on the record train that is being played
back.
The Post-Roll parameter is not taken into account for this
functionality.
Values Yes / No
When playing record trains where cue points have been
marked, the playout freezes on the cue point if the parameter
is set to “Yes”. It plays through if the parameter is set to “No”.
Default value No
Protocol Receive page
Description Specifies on which page the clips created by protocols are
stored. When a page is full, clips are stored on the next page.
Only clips created on this page (and the other protocol pages if
the first page is full) are visible for protocols.
Values 1 to 10 (=0)
Default value 6
Playlist Receive page
Introduction This setting is linked to the copy function that allows users to
automatically create a local copy of all network clips when
copying a local or network playlist. For details, refer to the
description of the Playlist copy function in the Operations
manual.
Availability The setting is only available if the license code 111 is valid.
Description Specifies on which page(s) of your EVS server the clips
received when using the PLST+CLIPS copy function must be
stored.
Clip pages can be assigned simultaneously as PUSH and
PLST Receive Pages.
Values 1 to 10 (=0)
Default value 0 (page 10)
179 3. Multicam Configuration
EVS Broadcast Equipment S.A. - November 2012 Issue 11.01.B