Port settings, 3g/dual, Introduction – EVS XT2 Version 11.01 - November 2012 Configuration Manual User Manual
Page 102
3G/Dual
Description
Defines the interface the EVS server will use with the 3D or
1080p standards:
•
The Dual Link interface consists of a pair of HD-SDI serial
links and provides a bitrate of 2.970 Gbit/s.
•
The 3G-SDI is not supported on an XT2 server.
Values
The possible values are:
•
‘No’: available in all cases.
•
‘Dual’ (Dual-Link) available in one of the conditions below:
◦
License code 21 (1080p Dual-Link) active AND
1080p resolution selected (Server tab, Video and
Reference)
◦
License code 23 (3D Dual-Link) active AND
3D setting set to 'Yes'
Default value
No
Port Settings
Introduction
The port settings allow assigning the RS422 ports to the various external controllers (EVS
or third-party) that will communicate with the EVS server.
These fields are available in the following interfaces:
•
in the Multicam Configuration window, Channels tab, in the advanced display mode
on page 1 on the server- and web-based interfaces.
•
in the Technical menu of the Remote Control Panel (T2.X).
The following screenshot highlights the Port settings, defined on page 1 of the Channels
tab in the server-based application:
XT2 Server - Version 11.01 - Configuration Manual
3. Multicam Configuration
92